BNMLS - 317, COMPETITION COLORS METAL FLAKE ORANGE
- MSDS: BNMLS
- Manufacturer: PLASTI KOTE CO INC
- Product Name: 317, COMPETITION COLORS METAL FLAKE ORANGE
- National Stock Number: 8010-00N030849
Product Identification
Product ID:317, COMPETITION COLORS METAL FLAKE ORANGE
MSDS Date:01/20/1987
FSC:8010
NIIN:00N030849
MSDS Number: BNMLS
Responsible Party
MEDINA, OH 44256
US
Emergency Phone: 216-725-4511
Info Phone: 216-725-4511
Cage: 07778
Contractor
Telephone: 330-725-4511
Cage: 07708
Ingredients
PROPANE, 2-METHYL-; (ISOBUTANE MIXTURE)
CAS: 75-28-5
RTECS: TZ4300000
BUTANE; (N-BUTANE)
CAS: 106-97-8
RTECS: EJ4200000
OSHA PEL 800 PPM
ACGIH TLV: 800 PPM
PROPANE
CAS: 74-98-6
RTECS: TX2275000
OSHA PEL 1000 PPM
ACGIH TLV: SIMPLE ASPHYXIANT
NONHAZARDOUS INGREDIENTS
Fraction By Weight: 9-14%
SLOWER THAN ETHER (PROPELLANT FASTER)
RTECS: 9999999ZZ
186@20C
CAS: 67-64-1
RTECS: AL3150000
Fraction By Weight: 26-33%
OSHA PEL 1000PPM
ACGIH TLV: 750PPM/1000STEL;9293
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
69@20C
CAS: 141-78-6
RTECS: AH5425000
Fraction By Weight: 5-10%
OSHA PEL 400 PPM
ACGIH TLV: 400 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
ACETIC ACID, ISOBUTYL ESTER; (ISOBUTYL ACETATE). VP
CAS: 110-19-0
RTECS: AI4025000
Fraction By Weight: 5-10%
OSHA PEL 150 PPM
ACGIH TLV: 150 PPM
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
5.1@20C
CAS: 1330-20-7
RTECS: ZE2100000
Fraction By Weight: 5-10%
OSHA PEL 100 PPM;150 PPM STEL
ACGIH TLV: 100 PPM;150 PPM STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
70@20C
CAS: 78-93-3
RTECS: EL6475000
Fraction By Weight: <5%
OSHA PEL 200 PPM;300 PPM STEL
ACGIH TLV: 200 PPM;300 PPM STEL
EPA Report Quantity: 5000 LBS
DOT Report Quantity: 5000 LBS
3.3@20C
CAS: 67-63-0
RTECS: NT8050000
Fraction By Weight: <5%
OSHA PEL 400 PPM;500 PPM STEL
ACGIH TLV: 400 PPM;500 PPM STEL
0.9 @ 20C.
CAS: 64-17-5
RTECS: KQ6300000
Fraction By Weight: <5%
OSHA PEL 1000 PPM
ACGIH TLV: 1000 PPM
2-PENTANONE, 4-HYDROXY-4-METHYL-; (DIACETONE ALCOHOL). VP
CAS: 123-42-2
RTECS: SA9100000
Fraction By Weight: <5%
OSHA PEL 50 PPM
ACGIH TLV: 50 PPM
1.7@20C
CAS: 108-83-8
RTECS: MJ5775000
Fraction By Weight: <5%
OSHA PEL 50 PPM
ACGIH TLV: 25 PPM; 9293
PROPELLANT CONSISTING OF INGREDIENTS 11-13
RTECS: 9999999ZZ
Fraction By Weight: 19%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE: INHAL: EXCESSIVE INHAL OF VAP
CAN CAUSE NASAL & RESP IRRIT, DIZZ, WEAKNESS, FATG, NAUS, HDCH,
POSS UNCON & EVEN ASPHY. EYE: CAN CAUSE SEV IRRIT, RED, TEARING,
BLURRED VISION. INGEST: CAN CAUSE GI IRRIT, NAUS, VOMIT, DIARR.
SKIN: CANCAUSE IRRIT FOR SOME PERSONS. CHRONIC: NONE KNOWN. RPTS
HAVE (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:HLTH HAZ: ASSOCIATED REPEATED AND PROLONGED
OCCUPATIONAL OVEREXPOSURE TO SOLVENTS WITH PERMANENT BRAIN AND
NERVOUS SYSTEM DAMAGE. SEV OVEREXP IN LAB ANIMALS HAS ALSO CAUSED
LIVER ABNORM & DAMAGE TO KI DNEYS, LUNGS, & SPLEEN. INTENTIONAL
MISUSE BY DELIB CONC & INHALING CONTENTS MAY BE HARMFUL OR FATAL.
Medical Cond Aggravated by Exposure:CAN CAUSE ALLERGIC RESPIRATORY
AND/OR SKIN REACTION.
First Aid
First Aid:INHAL: REMOVE TO FRESH AIR. IF BRTHG IS DFCLT, ADMINISTER O2.
IF BRTHG IS STOPPED, GIVE ARTF RESP & SEEK MED HELP. EYES: FLUSH
W/H2O FOR @ LST 15 MIN WHILE HOLDING LIDS OPEN. GET MED ATTN.
INGEST: DO NOT INDUCE VOMIT(ASPIR OF MATL INTO LUNGS CAN CAUSE
CHEM PNEUM, WHICH CAN BE FATAL). KEEP PERSON WARM, QUIET, & GET MED
ATTN/POIS CTRL CTR. SKIN: WASH W/SOAP & H2O/VARIOUS HAND (SUPP
DATA)
Fire Fighting
Flash Point:0F,-18C
Lower Limits:1%
Extinguishing Media:"ALCOHOL"FOAM, CO2, DRY CHEMICAL.
Fire Fighting Procedures:NIOSH/MSHA APPRVD SCBA & FULL PROT EQUIP. H2O
SPRAY MAY BE INEFTIVE. H2O MAY BE USED TO COOL CLSD CONTR TO PVNT
PRESS BUILD-UP & POSS (SUPP DATA)
Unusual Fire/Explosion Hazard:CLSD CONTR MAY EXPLODE &/OR AUTOIGNITE
WHEN EXPOS TO EXTREME HEAT. VAP ARE HVR/AIR & MAY TRAVEL ALONG
GROUND/MAY BE MOVED BY VENT & IGNITED BY PILOT (SUPP DATA)
Accidental Release
Spill Release Procedures:ELIMINATE ALL IGNITION SOURCES. VENTILATE
AREA. ABSORB LIQUID ON PAPER, VERMICULITE, FLOOR ABSORBENT, OR
OTHER ABSORBENT MATERIAL AND TRANSFER TO A CLOSED CONTAINER.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:DO NOT STORE IN AREAS ABOVE 120F, OR
IN DIRECT SUNLIGHT, OR NEAR HEAT OR OPEN FLAMES. DO NOT
PUNCTURE/INCINERATE.
Other Precautions:STORE LG QTY IN BUILDINGS PROTECTED FOR STORAGE OF
NFPA CLASS IC FLAMMABLE LIQUIDS.
Exposure Controls
Respiratory Protection:FOR CASUAL/OCCAS USE-TO AVOID BRTHG VAP/SPRAY
MIST. OPEN WINDOWS & DOORS/USE OTHER MEANS TO ENSURE FRESH AIR
ENTRY DURING APPLICATN & DRYING. IF YOU EXPER EYE WATER, HDCH/DIZZ,
INCR FRESH AIR, WEAR NI OSH/MSHA APPRVD RESP PROT (SUPP DATA)
Ventilation:FOR REGULAR/CONTINUOUS USE-PROVIDE SUFFICIENT MECH(GEN)
&/OR LOC EXHAUST VENTILATION TO MAINTAIN EXPOSURE BELOW TLV'S.
Protective Gloves:CHEM RESISTANT GLOVES SUCH AS NEOPRENE.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WHERE SPECIAL OR UNUSUAL CONDITIONS EXIST,
EXPERT ASSISTANCE OF AN INDUSTRIAL HYGIENIST SHOULD BE SOUGHT.
Work Hygienic Practices:WASH HANDS BEFORE EATING OR USING WASHROOM. AS
WITH ALL CHEMICALS, MINIMIZE PERSONAL CONTACT AND BREATHING OF
VAPORS.
Supplemental Safety and Health
FIRE FIGHT PROC:AUTOIGNIT/EXPLO WHEN EXPOS TO EXTREME HEAT. IF H2O IS
USED FOG NOZZ ARE PREF. EXPLO HAZ: LIGHTS, OTHER FLAMES, SPARKS,
HEATERS, SMOKING, ELEC MOTORS/OTHER IGNIT SOURCES @ LOCATIONS DIS
TANT FROM MATL HNDLG PT. FIRST AID PROC: CLEANERS, & WASH CLTHG
BEFORE RE-USE. RESP PROT: (TC23/EQUIVALENT)/LEAVE AREA.
Chemical Properties
HCC:V3
Boiling Pt:B.P. Text:>133F,>56C
Melt/Freeze Pt:M.P/F.P Text:1500F,816C
Vapor Pres:SEE INGRED
Vapor Density:HVR/AIR
Spec Gravity:<1(H2O=1)
Evaporation Rate & Reference:ING 15
Solubility in Water:SLIGHT TO MODERATE
Appearance and Odor:TYPICAL SOLVENT PAINT.
Percent Volatiles by Volume:85-90
Stability
Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG OXIDIZING AGENTS AND HEAT.
Stability Condition to Avoid:HEAT, SPARKS, AND OPEN FLAME.
Hazardous Decomposition Products:MAY FORM TOX, CO2/CO, VARIOUS
HYDROCARBONS, NITROGEN COMPOUNDS, ETC., WHEN BURNED.
Disposal
Waste Disposal Methods:MATERIAL COLLECTED ON ABSORBENT MATERIAL MAY BE
DEPOSITED IN A POSTED TOXIC SUBSTANCE LANDFILL IN ACCORDANCE WITH
LOCAL, STATE AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.